Whyte E-120 Frameset 2010

Only £1,499.00

(€ 1703.75)

Email a Friend

Options:

Enlarge this image

More XC Full Suspension

More Whyte products

More Whyte XC Full Suspension

Whyte E-120 Frameset 2010

The E-120 Frameset is the frameset of the E-120 series without all the components which offers this brillant frame to b personal moulded to ur preference with many customisable options.

Carbon

Whyte have poured all their efforts into creating the highest quality carbon frames that have high performance and low weight. From careful selection of materials, the Perfect Monocoque Manufacturing technique and manufacture by hand by a senior composite engineer Whyte aim to deliver a leading edge performance that other competitors can’t match

Quad-Link II

The Quad-Link II provides exceptional protection for the shock stopping mud splash backs reaching the shock as its protected from the seat post but also the swingarm which keeps the shock as clean as dry as possible this not only vastly increases the performance over long distances but also reduces the maintenance needed and possible damage to the shock. The performance of the shock goes much deeper than the simple design by teaming up with Fox, SRAM and DT Swiss Whyte can tailor the leverage ration from the spring rates of the air shocks. The Quad-Link II suspension can use a minimally damped shock to give the plushest small bump response but can then transition through the mid stroke to take care of the biggest hits without ramping up or bottoming out. The intelligent wheel path design is the main performance aspect of the Quad system that controls the amount of chain growth to ensure optimum speed over any bump.

Description

Whyte E-120 Frameset 2010

Specification

#Colour - Raw Uni-directional Carbon Red and Silver
#Sizes - XS, S, M, L
#Frame - Uni-directional Multi Monoque front triangle, Titanium pivot bolts, single monoque Rear Swing arm, Carbon Linkages
#Fork Spec - Designed for use with a 120mm-130mm travel fork for optimum performance
#Rear Shock - Fox Float RP23, with Rebound Adjustment and Adjustable DOHC ProPedal, Whyte Designs Cartridge Bearing Lower Shock Bushings
#Front Derailleur Spec - 34.9 diameter down pull
#Seatpost Spec - 30.9mm Diameter
#Headset - FSA Special Whyte Integrated headset, with 1/18" Top and 1 1/4" Lower Sealed Cartridge Bearings
#Rear Hub Spec - Any standard 135mm wide mountain bike hub can be used
#Big Gripper - Unique Big Gripper rear hub adaptors are included

Geometry

X Small
#Head Angle - 69.6°
#Seat Angle - 71.6°
#Top Tube - 571.9mm
#BB Height - 345.44mm
#Stand Over - 719.3mm
#Wheel Base - 1058.4mm
#Chain Stay - 420mm
#Seat Post - 30.9mm
#Head Tube - 128mm

Small
#Head Angle - 69.6°
#Seat Angle - 71.6°
#Top Tube - 583.5mm
#BB Height - 354.44mm
#Stand Over - 741.9mm
#Wheel Base - 1070.7mm
#Chain Stay - 420mm
#Seat Post - 30.9mm
#Head Tube - 143mm

Medium
#Head Angle - 69.6°
#Seat Angle - 71.6°
#Top Tube - 596.2mm
#BB Height - 345.44mm
#Stand Over - 754mm
#Wheel Base - 1083.8mm
#Chain Stay - 420mm
#Seat Post - 30.9mm
#Head Tube - 153mm

Large
#Head Angle - 69.6°
#Seat Angle - 71.6°
#Top Tube - 610.3mm
#BB Height - 345.44mm
#Stand Over - 780.6mm
#Wheel Base - 1098.8mm
#Chain Stay - 420mm
#Seat Post - 30.9mm
#Head Tube - 173mm

BOOKMARK & SHARE